Threaded connection rubber expansion joint, EPDM threaded rubber expansion joint,
bearing rubber expansion joint Threaded rubber joints - 3/4", 11/2", 2", EPDM, NR, NBR, IIR, CR, rubber materials
The threaded rubber expansion joint is an expansion component located within the group of rubber expansion joints.
This type of expansion joint is mainly used in equipment such as water pumps, fans, coolers, air compressors, refrigerators, etc.
The steel industry, shipyards and chemical applications can be used within the temperature range of -10 to +90 degrees Celsius.
Introduction to threaded rubber joints:
Threaded rubber joints are derivative products of flange rubber joints;
The maximum diameter is DN80 and the working pressure is 1.6 MPa.
The experimental pressure is 4.0 MPa, and the bursting pressure is 6.5 MPa.
This product is made with nylon curtain fabric as the base material and is reinforced with rubber products.
It has high compressive strength, good elasticity and a large deflection.
Resistant to aging, shock absorption, noise reduction.
